China Slurry Pumps, Warman Pumps and Warman Slurry Pump Parts Manufacutrer in China - Tobee Pump 180 3203 4573

TP200SV Submerged Slurry Pump


    Size: 200mm
    Capacity: 180-890m3/h
    Head: 6.5-37m
    Speed: 400-850rpm
    Eff.: 64%
    Power: Max.110kw
    Handling solids: 65mm
    Materials: High chrome alloy, Rubber, Polyurethane, Ceramic etc

Inquire Now
  • Product Description

Tobee® TP200SV Submerged Slurry Pumps are an ultra-heavy duty design for continuous operation, the bearing assembly design allows the pumps to operate in very tough conditions without damaging the bearing. Both high chrome alloy and elastomer wet end parts are suitable to the different applications, and the pumps use in many industries, various lengths and suction extensions are available to suit most sump depths.

Design Features:

Less wear, less corrosion
Wetted components are available in a wide range of alloys and elastomers. Tobee selects the optimum combination of materials for maximum resistance to wear in virtually any industrial application, including those demanding both abrasion and corrosion resistance, and where larger particles or high density slurries are encountered.
• Abrasion resistant Ultrachrome® T05 alloy.
• Abrasion/corrosion-resistant Hyperchrome® T49 alloy.
• Corrosion-resistant stainless steels.
• Natural and synthetic elastomers.
No submerged bearing failures
The robust cantilever shaft avoids the need for lower submerged bearings which are often the source of premature bearing failure.
• Heavy duty roller bearings, above mounting plate.
• No submerged bearings.
• Labyrinth/flinger bearing protection.
• Rigid, large diameter shaft.
No shaft sealing problems
The vertical cantilever design requires no shaft seal.
No priming required.
The top and bottom inlet design is ideally suited for “snore” conditions.
Less risk of blocking
The screened inlets and large impeller passages reduce the risk of blockages.
Zero ancillary water costs
The vertical cantilever design with no gland or submerged bearings avoids the need for expensive gland or bearing flushing water.

Tobee® TP200SV Submerged Slurry Pump Performance Parameter:


Power P


Capacity Q


Head H


Speed n


Eff. η


Impeller dia.


Max. particles





Tobee® TP200SV Submerged Slurry Pump Structural Drawing:

Tobee TP200SV Submerged Slurry Pump Structural Drawing

Tobee® TP200SV Submerged Slurry Pump Inspection Process:

Stages of manufacture                     
Quality control activities                                                   
Pump designAppearance, sizeGB/10888-89
Raw material arrivalSampling, material chemical analysisGB121.1-29-2008
Casting and compositionMaterial chemical analysis of pump partsGB121.1-29-2008
Casting quality inspectionGB302-2012
Key component machiningDimension precision inspectionJB/T6879-93
Impeller balancingGB061-2002
General assemblyProcedure operationGB2103-96
Hydraulic static testGB064-2008
PaintingAnticorrosion primer paintJB/T4297-92
Epoxy coatingJB/T4297-92
Performance test of pump unitCapacity and headGB157-1998
Vibration and noiseJB/T8097-05
Bearing temperatureJB/T5295091
Final inspectionPackaging of pump unitGB0157-2008
Technical documentsGB0157-2008
Spare parts and accessoriesGB0157-2008

Tobee® TP200SV Submerged Slurry Pumps After-sales Service:

As the slurry pump wet ends parts such as the impeller, volute liner, FPL insert, Throat bush and bearing assembly are consumption parts and we could provide you always the qualified slurry pump parts within very short time.

Packing Transport Services
Considering the order pump size and we could provide case or pallet as per your need to make sure it safe enough during the long distance road and ocean shipping. having own export company and so we could help you find the best ocean shipping solution and service for you from the goods out of factory to your destination.

Installation Services
Tobee Pump have more than 30 years experienced pump installation workers and are very aware of any onside application. We could provide abroad pump installation service and expect pump manufacturing and sales,abroad pump installation is getting more and more popular by our regular clients abroad.

Technical Support Services
Technical data sheet, Performance curve, General arrangement drawing, Operating manual will be sent within 24th for your checking, So Pls feel free to contact us If you have any need.

Tobee® TP200SV Submerged Slurry Pumps On-site Applications:

Tobee TP200SV Submerged Slurry Pumps On-site Applications

• Mining• Sump drainage• Coal prep• Mineral processing
• Mill sumps• Tunnel• Tailings• Chemical slurries
• Ash handing• Paper and Pulp• Waste sludge• Coarse sand
• Lime mud• Phosphoric acid• Sump Dredging• Mill grinding
• Alumina Industry• Power Plant• Potash Fertilizer Plant• Other industries

Tobee® TP200SV Submerged Slurry Pumps Dimensional Drawing:

Tobee TP200SV Submerged Slurry Pumps Dimensional Drawing

Contact Us

Copyright © 1987-2017 Tobee® Pump. All Rights Reserved

* * *