Tobee® TH Slurry Pumps are the most comprehensive range of centrifugal slurry pumps for use in mining, minerals processing, coal preparation, dredging, metallurgy, power plant, chemical and general industry applications. The wetted parts materials designed by High abrasion and corrosion resistance alloy, rubber or polyurethane etc, Expecially for handling highly abrasive,high density slurries.
Design Features:
• Horizontal,Cantilevered,Centrifugal,Single stage slurry pump design.
• Bearing assembly - A large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.
• Casing - Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety.
• Impeller - Front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and moulded elastomer impellers are completely interchangeable.
• Liners - Easily replaceable liners are bolted, not glued, to the casing for positive attachment and east of maintenance. Hard metal liners are completely interchangeable with pressure moulded elastomer
• Throatbush - Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.
• Shaft seal - Packing seal,Centrifugal seal,Mechanical seal;
• Driving type - Flexible coupling,V-belt with pulleys,Gearbox,VFD,SCR control etc.
• The discharge branch can be oriented to any eight positions at the interval of 45 degrees;
• Easy to install and maintain in on-site application.
Tobee® TH Slurry Pumps Quick Selection Chart:
Tobee® TH Slurry Pumps Performance Parameters:
Model | Max.Power (kw) | Materials | Clear water performance | Impeller Vane No. | |||||
Liner | Impeller | Capacity Q ( m3/h) | Head H ( m) | Speed n (rpm) | Eff.η (%) | NPSH (m) | |||
TH1.5/1B | 15 | M | M | 12.6~28.8 | 6~68 | 1200~3800 | 40 | 2~4 | 5 |
RU | RU | 10.8~25.2 | 7~52 | 1400~3400 | 35 | 3 | |||
THH1.5/1B | 30 | M | M | 16.2~34.2 | 25~92 | 1400~2200 | 20 | 1~5.5 | 5 |
TH2/1.5B | 15 | M | M | 32.4~72 | 6~58 | 1200~3200 | 45 | 3.5~8 | 5 |
RU | RU | 5.5~41 | 1000~2600 | 50 | 2.5~5 | ||||
TH3/2C | 30 | M | M | 39.6~86.4 | 12~64 | 1300~2700 | 55 | 4~6 | 5 |
RU | RU | 36~75.6 | 13~39 | 1300~2100 | 2~4 | ||||
THH3/2D | 60 | M | M | 68.4~126.8 | 25~87 | 850~11400 | 47 | 3~7.5 | 5 |
TH4/3C | 30 | M | M | 86.4~198 | 9~52 | 1000~2200 | 71 | 4~6 | 5 |
RU | RU | 79.2~180 | 5~34.5 | 800~1800 | 59 | 3~5 | 5 | ||
TH4/3D | 60 | M | M | 97.2~198 | 9~53 | 71 | 4~6 | 5 | |
RU | RU | 79.2~180 | 5~34.5 | 800~1800 | 59 | 3~5 | 5 | ||
THH4/3E | 120 | M | M | 126~252 | 12~97 | 600~1400 | 50 | 2~5 | 5 |
TH6/4D | 60 | M | M | 162~360 | 12~56 | 800~1550 | 65 | 5~8 | 5 |
RU | RU | 144~324 | 12~45 | 800~1350 | 65 | 3~5 | 5 | ||
TH6/4E | 120 | M | M | 162~360 | 12~56 | 800~1550 | 65 | 5~8 | 5 |
RU | RU | 144~324 | 12~45 | 800~1350 | 65 | 3~5 | 5 | ||
THH6/4S | 560 | M | M | 324~720 | 30~118 | 600~1000 | 64 | 3~8 | 5 |
120 | M | M | 360~828 | 10~61 | 500~1140 | 72 | 2~9 | 5 | |
RU | RU | 324~720 | 7~49 | 400~1000 | 65 | 5~10 | 5 | ||
TH8/6R | 300 | M | M | 360~828 | 10~61 | 500~1140 | 72 | 2~9 | 5 |
RU | RU | 324~720 | 7~49 | 400~1000 | 65 | 5~10 | 5 | ||
TH10/8ST | 560 | M | M | 612~1368 | 11~61 | 400~850 | 71 | 4~10 | 5 |
RU | RU | 540~1188 | 12~50 | 400~750 | 75 | 4~12 | |||
TM10/8E | 120 | M | M | 666~1440 | 14~60 | 600~1100 | 73 | 4~10 | 5 |
RU | RU | 540~1188 | 10~42 | 500~900 | 79 | 5~9 | 5 | ||
560 | M | M | 936~1980 | 7~68 | 300~800 | 82 | 6 | 5 | |
RU | RU | 720~1620 | 7~45 | 300~650 | 80 | 2.5~7.5 | |||
TH14/12ST | 560 | M | M | 1260~2772 | 13~63 | 300~600 | 77 | 3~10 | 5 |
RU | RU | 1152~2520 | 13~44 | 300~500 | 79 | 3~8 | 5 | ||
TH16/14ST | 560 | M | M | 1368~3060 | 11~63 | 250~550 | 79 | 4~10 | 5 |
TH16/14TU | 1200 | ||||||||
TH18/16ST | 560 | M | M | 2160~5040 | 8~66 | 200~500 | 80 | 4.5~9 | 5 |
TH18/16TU | 1200 | ||||||||
TH20/18TU | 1200 | M | M | 2520~5400 | 13~57 | 200~400 | 85 | 5~10 | 5 |
Tobee® TH Slurry Pumps Structural Design:
Metal Lined Pump | Rubber Lined Pump | ||||
No | Parts Name | Materials | No | Parts Name | Materials |
1 | Liner | 27.5% UltraChrome Alloy | 1 | Frame Plate | QT500-7 |
2 | Frame Plate | QT500-7 | 2 | Expeller Ring | 27% High Chrome Alloy |
3 | Frame Plate Liner Insert | 27.5% UltraChrome Alloy | 3 | Gland Assembly | HT200 |
4 | Cover Plate | QT500-7 | 4 | Shaft Sleeve | 420 Stainless Steel |
5 | Throat Bush | 27.5% UltraChrome Alloy | 5 | Expeller | 27% High Chrome Alloy |
6 | Impeller | 27.5% UltraChrome Alloy | 6 | Frame Plate Liner | Rubber Coated High Tensile Steel |
7 | Expeller Ring | 27% UltraChrome Alloy | 7 | Impeller | Rubber Coated High Tensile Steel |
8 | Shaft Sleeve | 420 Stainless Steel | 8 | Cover Plate Liner | Rubber Coated High Tensile Steel |
9 | Expeller | 27% HighChrome Alloy | 9 | Cover Plate | QT500-7 |
10 | Bearing Assembly | SKF/Timken (Standard) | |||
Tobee® TH Slurry Pump Wetted Parts Design:
Tobee® TH Slurry Pumps Shaft Seal Arrangement:
• Packing Seal is a general shaft seal.It applys to various pumping conditions, PTFE and Graphite materials of Packing can be used in high corrosive slurries or high temperature conditions.Using ceramic shaft sleeve,For high abrasion conditions, The ceramic shaft sleeve is available.
| No. | Part name | Materials |
1 | Stuffing box | KmTBCr27 | |
2 | Lantern restrictor | 1Cr8Ni9Ti | |
3 | Packing | PTFE | |
4 | Gland assembly | HT250 | |
5 | Shaft sleeve | KS81 |
• Expeller Seal is an impeller force of reversed centrifugal force, preventing slurry leakage. Expeller seal can be used on the single-stage pump when the positive pressure of pump inlet is no more than 10% of pump outlet pressure or on the first-stage pump in the pump series.
| No. | Part name | Materials |
1 | Expeller ring | KmTBCr27 | |
2 | Expeller | KmTBCr27 | |
3 | Packing | PTFE | |
4 | Neck ring | 1Cr8Ni9Ti | |
5 | Lantern ring | 1Cr8Ni9Ti | |
6 | Gland assembly | HT250 | |
7 | Oil cup | Q235 |
• Mechanical Seal is advanced sealing technique without sealing leakage, The advantages are integrating construction, convenient installation & replacement, The design of mechanical seal and seal box is suitable for liquid flow condition,So it has high abrasion and vibration resistance, Mechanical seal can be used in various severe conditions.
| No. | Part name | Materials |
1 | Static ring assembly | SS316 | |
2 | Rotating ring assembly | SS316 |
Tobee® TH Slurry Pumps Drive Module Design:
|
|
|
Tobee® TH Slurry Pumps Frame Explanation:
Frame type | A | B | C | D | E | R | F | G | S | T |
Max.Power (kw) | 7.5 | 15 | 30 | 60 | 120 | 300 | 260 | 600 | 560 | 1200 |
Frame Weight (kg) | 17 | 24 | 45 | 77.5 | 154 | 228 | 555 | 1006 | 546 | 1156 |
Amount of Shaft Sealing Water (l/s) | 0.15 | 0.25 | 0.35 | 0.55 | 0.70 | 0.70 | 0.70 | 1.20 | 1.20 | 1.60 |
Tobee® TH Slurry Pumps On-site Applications:
• Mining | • Mineral processing | • Coal prep | • Cyclone feeds |
• Tunnel | • Chemical slurries | • Tailings | • Mill grinding |
• Ash handing | • Paper and Pulp | • Waste sludge | • Coarse sand |
• Lime mud | • Phosphoric acid | • Dredging | • Construction |
• Alumina Industry | • Power Plant | • Potash Fertilizer Plant | • Other industries |
Typical:
Mining & Mineral Processing
The slow running speeds of the Tobee TH Heavy Duty Slurry Pump, together with the comprehensive choice of abrasion resistant alloys and elastomers, provide unrivalled performance and service life for all abrasive mining and minerals processing applications.
Chemical Process
The interchangeability of alloy and elastomer components in the same pump casing, together with a wide range of mechanical seals, make the Tobee TH Heavy Duty Slurry Pump the most flexible choice for the chemical plant environment.
Sand & Gravel
Designed for easy and simple strip down and re-assembly, the Tobee TH Heavy Duty Slurry Pump minimises downtime, making it the ideal choice where installed stand by pumps are not available.
Sugar Processing
The premium reliability and service life of the Tobee TH Heavy Duty Slurry Pump is specified by many sugar plant engineers worldwide where uninterrupted pump operation during the sugar campaign is a critical requirement.
Flue Gas Desulphurisation
The new generation of specially formulated abrasion and corrosion resistant alloys, together with the very latest elastomer technology, positions Tobee Pumps firmly as a major supplier of pumps to the FGD industry.
Oil & Gas Exploration
Over a number of years we have developed the proven design of the Tobee TH Heavy Duty Slurry Pump ranges to suit the specific demands of offshore applications. We can now offer the most reliable top side solution to erosive wear.
Industrial Applications
Wherever abrasive solids are causing premature failure of pumps, the Tobee TH Heavy Duty Slurry Pump range has the right combination of performance, wear life and reliability to bring the customer the lowest cost of ownership.
Tobee® TH Slurry Pumps Dimensions:
* Tobee® is a registered trademark and does not represent or is not in any way affiliated with Warman® of Weir Minerals Group. All names,numbers, symbols and descriptions are used for reference purpose only and do not imply that any pumps or parts listed is the product of Warman Pumps.
* Tobee® TH slurry pumps and spares are only interchangeable with Warman® AH slurry pumps and spares.
* This document is the property of Tobee® Pump and can be neither reproduced nor disclosed to a third party without a written authorization.
