Tobee® TS End Suction Pumps is an energy-saving single-stage centrifugal pump designed by technical
team in the whole Tobee group , It is improved on a basis on model BA, B
and other single-stage water centrifugal pump. Its hydraulic capability
is distributed reasonably, wide option for user, conveniently check and
repair, The efficiency and throw is up to advanced international level. This pump is suitable for industrial and city water supply, water
drainage, and widely used for agricultural irrigation, transportation
pure water or other liquids which physical and chemical nature is
similar to pure water, and the temperature should not be higher than 80
℃.
Design Features:
• TS series single-stage end-suction centrifugal pump is designed according to the capability and size stipulated in the international Standard ISO2858, it is composed of pump body, pump cover, impeller, shaft, ring seal, sleeve and suspended bearing units
• The pump body and pump cover are separated from the back of impeller, that is to say in general, back open structure.
• The pump shell (that is pump body and pump cover) forms the workroom of pump. Impeller, shaft and rolling bearing are the rotors for the pump. Suspended bearing units support the rotors in the pump. The rolling bearing stands the radial load and axial force
• The axial sealing ring is composed of packing gland, packing rings and packing to avoid air admission or severe water leakage.
• To avoid abrasion of shaft, the part where the shaft runs through packing chamber is fitted with protective muff. O ring is fitted between muff and shaft to protect against air entering or water leaking along the matching surface
• The pump is connected to motor with extending flexible coupling. The pump turns clockwise when you look from the driving end
Tobee® TS End Suction Pumps Quick Selection Chart:
Tobee® TS End Suction Pumps Performance Parameters:
Model | Capacity Q (m3/h) | Head H (m) | Speed n (rpm) | Power P (kw) | Eff.η (%) | NPSHr (mm) |
TS50 | 3.4-15 | 3.7-68.8 | 1450/2900 | 0.55-11 | 60 | 2-2.5 |
TS65 | 6.8-30 | 3.7-126.8 | 1450/2900 | 0.55-30 | 69 | 2-2.5 |
TS80 | 13.6-60 | 3.6-128 | 1450/2900 | 0.55-45 | 75 | 2.5-3 |
TS100 | 27.3-120 | 3.4-115.5 | 1450/2900 | 1.5-75 | 78 | 3.5-4.8 |
TS125 | 56-240 | 8.5-132.5 | 1450/2900 | 2.2-110 | 81 | 3.8-5 |
TS150 | 99-240 | 12.4-57.5 | 1450 | 15-55 | 81 | 2.5-3.5 |
TS200 | 197.7-460 | 14.8-55.8 | 1450 | 30-90 | 82.5 | 3.-4.5 |
Tobee® TS End Suction Pumps Structural Drawing:
Pump casing | 7. | Lock washer | |
2. | Pump cover | 8. | Shaft sleeve |
3. | Impeller | 9 | Packing gland |
4. | Shaft | 10. | Packing ring |
5. | Sealing ring | 11. | Packing |
6. | Impeller nut | 12. | Bearing assembly |
Tobee® TS End Suction Pumps Structural Design:
Tobee® TS End Suction Pumps On-site Applications:
• City water supply | • Agricultural irrigation | • Water drainage | • Pure water |
• Water circulation | • Hot water | • Condensate water | • Cooling water |
• Sea water | • Salt water | • Marine ballasting | • Boiler water supply |
• Mining water supply | • Garden water supply | • Water booster | • Aquaculture |
• Fire fighting | • HVAC water Supply | • Chemicals | • Other industries |
Tobee® TS End Suction Pumps Drawing:
